Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Radio/audio System Check? | -- | Go to Step 2 | Go to Radio/Audio System Check |
2 | Attempt to use the radio, CD, and cassette player. Are all of the speakers inoperative? | -- | Go to Step 3 | Go to Step 7 |
3 |
Is ignition positive voltage present? | -- | Go to Step 5 | Go to Step 4 |
4 | Repair the open in the GRY wire between terminal 4 of the radio connector and terminal 1 of connector C2 of the multifunction alarm module. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Radio/Audio System Check | -- |
5 | Test for continuity using a J 39200 between terminal 9 of the radio connector and ground. Does continuity exist between terminal 9 of the radio connector and ground? | -- | Go to Step 40 | Go to Step 6 |
6 | Repair the open in the BRN wire between terminal 9 of the radio connector and ground. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Radio/Audio System Check | -- |
7 | Are both rear speakers inoperative? | -- | Go to Step 12 | Go to Step 8 |
8 | Is the LH rear speaker inoperative? | -- | Go to Step 16 | Go to Step 9 |
9 | Is the RH rear speaker inoperative? | -- | Go to Step 21 | Go to Step 10 |
10 | Is the LH front speaker inoperative? | -- | Go to Step 26 | Go to Step 11 |
11 | Is the RH front speaker inoperative? | -- | Go to Step 31 | Go to Radio/Audio System Check |
12 |
Does continuity exist between terminal 1 and terminal 7 of the radio connector? | -- | Go to Step 13 | Go to Step 14 |
13 | Test for a short to ground using a J 39200 between terminal 1 and ground. Does a short to ground condition exist? | -- | Go to Step 14 | Go to Step 8 |
14 | Inspect the inline connector C220 located behind the LH body hinge pillar trim panel. Is the connector C220 unplugged or damaged? | -- | Go to Step 15 | Go to Step 8 |
15 | Repair the inline connector C220. Is the repair complete? | -- | Go to Step 8 | -- |
16 |
Does continuity exist between terminal 1 and terminal 7 of the radio connector? | -- | Go to Step 19 | Go to Step 17 |
17 | Test for continuity using a J 39200 between terminal 1 and 2 of the LH rear speaker. Does continuity exist between terminal 1 and terminal 2 of the speaker? | -- | Go to Step 18 | Go to Step 36 |
18 | Repair the open in the speaker feed wires. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 9 | -- |
19 | Test for a short to ground using a J 39200 between terminal 7 and ground. Does a short to ground condition exist? | -- | Go to Step 20 | Go to Step 40 |
20 | Repair the short to ground condition in the speaker feed wires. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 9 | -- |
21 |
Does continuity exist between terminal 2 and terminal 8 of the radio connector? | -- | Go to Step 24 | Go to Step 22 |
22 | Test for continuity using a J 39200 between terminal 1 and 2 of the RH front speaker. Does continuity exist between terminal 1 and terminal 2 of the speaker? | -- | Go to Step 23 | Go to Step 38 |
23 | Repair the open in the speaker feed wires. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 10 | -- |
24 | Test for a short to ground using a J 39200 between terminal 2 and ground. Does a short to ground condition exist? | -- | Go to Step 25 | Go to Step 40 |
25 | Repair the short to ground condition in the speaker feed wires. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 10 | -- |
26 |
Does continuity exist between terminal 5 and terminal 12 of the radio connector? | -- | Go to Step 29 | Go to Step 27 |
27 | Test for continuity using a J 39200 between terminal 1 and 2 of the RH front speaker. Does continuity exist between terminal 1 and terminal 2 of the speaker? | -- | Go to Step 28 | Go to Step 37 |
28 | Repair the open in the speaker feed wires. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 11 | -- |
29 | Test for a short to ground using a J 39200 between terminal 5 and ground. Does a short to ground condition exist? | -- | Go to Step 30 | Go to Step 40 |
30 | Repair the short to ground condition in the speaker feed wires. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 11 | -- |
31 |
Does continuity exist between terminal 6 and terminal 13 of the radio connector? | -- | Go to Step 34 | Go to Step 32 |
32 | Test for continuity using a J 39200 between terminal 1 and 2 of the RH front speaker. Does continuity exist between terminal 1 and terminal 2 of the speaker? | -- | Go to Step 33 | Go to Step 39 |
33 | Repair the open in the speaker feed wires. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Radio/Audio System Check | -- |
34 | Test for a short to ground using a J 39200 between terminal 6 and ground. Does a short to ground condition exist? | -- | Go to Step 35 | Go to Step 40 |
35 | Repair the short to ground condition in the speaker feed wires. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Radio/Audio System Check | -- |
36 | Replace speaker. Refer to Radio Rear Speaker Grille Replacement and to Radio Rear Speaker Replacement . Is the repair complete? | -- | Go to Step 9 | -- |
37 | Replace speaker. Refer to Speaker Replacement . Is the repair complete? | -- | Go to Step 11 | -- |
38 | Replace speaker. Refer to Radio Rear Speaker Grille Replacement and to Radio Rear Speaker Replacement . Is the repair complete? | -- | Go to Step 10 | -- |
39 | Replace speaker. Refer to Speaker Replacement . Is the repair complete? | -- | Go to Radio/Audio System Check | -- |
40 | Replace the radio. Refer to Radio Replacement . Is the repair complete? | -- | Go to Radio/Audio System Check | -- |
