For 1990-2009 cars only
Removal Procedure
- Using a taped flat bladed tool, gently pry and release the 3 clips around the rear window defogger/hazard warning switch trim plate (1).
- Disconnect the hazard warning switch electrical connector (2).
- Depress the tab on each side of the hazard switch.
- Remove the switch from the rear window defogger/hazard warning switch trim plate (3).
Installation Procedure
- Install the hazard warning switch to the rear window defogger/hazard warning switch trim plate (3). Ensure that the retaining tabs are fully engaged.
- Connect the hazard warning switch electrical connector (2).
- Install the rear window defogger/hazard warning switch trim plate (3) to the I/P. Ensure that the retaining clips are fully engaged.
