Step | Action | Value(s) | Yes | No | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Did you perform the Instrument Cluster System Check? | -- | ||||||||||||||||
2 | Inspect the following indicators:
Are the inspected indicators inoperative? | -- | ||||||||||||||||
3 | Test the WHT/BLK using a J 39200 between the instrument cluster connector C2 cavity 12 and G204 for an open. Does the wire have an open? | -- | ||||||||||||||||
4 | Repair the open in the WHT/BLK wire between the instrument cluster connector C2 cavity 12 and G204. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |||||||||||||||
5 | Inspect the following indicators:
Are the inspected indicators inoperative? | -- | ||||||||||||||||
6 |
Does the test lamp illuminate? | -- | ||||||||||||||||
7 | Replace the instrument cluster assembly printed circuit. Refer to Printed Instrument Cluster Circuit Replacement . Is the repair complete? | -- | -- | |||||||||||||||
8 | Test the RED/BLU wire using a J 39200 between junction block 3 connector C2 and the instrument cluster assembly C1 cavity 2 for an open. Does the wire have an open? | -- | ||||||||||||||||
9 | Repair the open in the RED/BLU wire. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |||||||||||||||
10 | Check connector C2 for damage. Is the connector damaged? | -- | ||||||||||||||||
11 | Repair the connector. Refer to Connector Repairs in Wiring Systems. Is the repair complete? | -- | -- |
