Step
| Action
| Value(s)
| Yes
| No
|
1
| Was the Cruise Control System Check
performed?
| --
|
Go to Step 2
| Go to
Cruise Control System Check
|
2
|
- Turn ignition OFF.
- Locate the cruise control module which is on the RH side of the
instrument panel next to the instrument panel compartment.
- Disconnect the cruise control module connector.
- Connect a J 39200
between the cruise control module connector terminal 11 and
ground.
Is the resistance equal to the specified value?
| Infinite
|
Go to Step 7
|
Go to Step 3
|
3
| With the cruise control module still disconnected.
- Disconnect the inflatable restraint steering wheel module coil
connector C2
- Connect a J 39200
between terminal 3 and terminal 5 of connector C2.
Is the resistance equal to the specified value?
| Infinite
|
Go to Step 5
|
Go to Step 4
|
4
|
- Check the cruise control switch connector for poor connection.
- If OK, replace the cruise control switch. Refer to
Cruise Control Switch Replacement
.
Is the replacement complete?
| --
|
Go to Step 10
| --
|
5
| With the cruise control module still disconnected.
- Disconnect the inflatable restraint steering wheel module coil
connector C2
- Connect a J 39200
between terminal 11 of the cruise control module coil connector
and ground.
Is the resistance equal to the specified value?
| Infinite
|
Go to Step 2
|
Go to Step 6
|
6
| Repair the short to ground between the WHT/BLU wire of
terminal 11 of the cruise control module connector and the inflatable
restraint steering wheel module coil.
Is the repair complete?
| --
|
Go to Step 10
| --
|
7
| With the cruise control module still disconnected.
- Disconnect the instrument cluster assembly connector C4.
- Connect a J 39200
between terminal 4 of the cruise control module coil and ground.
Is the resistance equal to the specified value?
| Infinite
|
Go to Step 9
|
Go to Step 8
|
8
| Repair the short to ground between the GRN/RED wire of
the cruise control module terminal 4 and terminal 7 of the instrument
cluster assembly connector C4.
Is the repair complete?
| --
|
Go to Step 10
| --
|
9
|
- Check the cruise control module connector for poor terminal contact.
- If OK, replace the cruise control module. Refer to
Cruise Control Module Replacement
.
Is the replacement complete?
| --
|
Go to Step 10
| --
|
10
| Install and connect any components removed during diagnosis .
Is the repair complete?
| --
| Go to
Cruise Control System Check
| --
|
