Did you perform the Power Windows System Check?

--

Go to Step 2

Go to Power Windows System Check

1. Disconnect the LH window/door lock switch.
2. Connect a fused jumper wire to cavity 4 of the connector
3. Depending on the window's position attach the other end of the jumper wire to one of the following positions:

•	If the window is down cavity 5

•	If the window is up cavity 1

4. Connect a second fused jumper wire to cavity 10 of the connector.
5. Depending on the window's position actuate the other end of the jumper wire to one of the following positions:

•	If the window is down cavity 1

•	If the window is up cavity 5

•	Turn the ignition to the run position.

Did the window move?

--

Go to Step 3

Go to Step 4

Replace the LH window/door lock switch. Refer to Front Side Door Window Switch Replacement .

Is the repair complete?

--

Go to Power Windows System Check

--

Test both the GRN and the YEL wire using a J 39200 DMM between the LH Front window motor and the LH window/door lock switch for an open.

Do either of the wires have an open?

--

Go to Step 5

Go to Step 6

Repair the open in the wire. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Power Windows System Check

--

Replace the LH front window motor. Refer to Front Side Door Window Regulator Replacement .

Is the repair complete?

--

Go to Power Windows System Check

--