Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Power Sunroof system check? | -- | Go to Step 2 | |
2 |
Does continuity exist? | -- | Go to Step 3 | Go to Step 5 |
3 | Test for continuity using a J 39200 DMM between cavity 1 and ground while depressing the SLIDE switch to the open position. Does continuity exist? | -- | Go to Step 4 | Go to Step 8 |
4 | Replace the sunroof control module. Is the repair complete? | -- | -- | |
5 |
Does continuity exist? | -- | Go to Step 6 | Go to Step 7 |
6 | Replace the actuator assembly. Refer to Sunroof Actuator Replacement . Is the repair complete? | -- | -- | |
7 | Repair the open in the GRN/WHT wire between the control module and the actuator assembly. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
8 |
Does continuity exist? | -- | Go to Step 9 | Go to Step 10 |
9 | Replace the sunroof switch assembly. Refer to Sunroof Switch Replacement . Is the repair complete? | -- | -- | |
10 | Repair the open in the PNK wire between the switch and the module. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- |
