Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Power Sunroof System Check? | -- | Go to Step 2 | |
2 |
Does continuity exist? | -- | Go to Step 3 | Go to Step 7 |
3 | Test for continuity using a J 39200 between cavity 9 of the sunroof control module connector and ground. Does continuity exist? | -- | Go to Step 4 | Go to Step 8 |
4 | Test for continuity using a J 39200 between cavity 2 of the sunroof control module connector and ground while depressing the SLIDE switch to the close position. Does continuity exist? | -- | Go to Step 5 | Go to Step 6 |
5 | Replace the sunroof control module. Is the repair complete? | -- | -- | |
6 |
Does continuity exist? | -- | Go to Step 12 | Go to Step 9 |
7 |
Does continuity exist? | -- | Go to Step 13 | Go to Step 10 |
8 |
Does continuity exist? | -- | Go to Step 13 | Go to Step 11 |
9 | Repair the open in the GRN/YEL wire between the sunroof control module and the sunroof switch assembly. Refer to Wiring Repairs in wiring systems. Is the repair complete? | -- | -- | |
10 | Repair the open in the GRN/WHT wire between the sunroof control module and the sunroof actuator. Refer to Wiring Repairs in wiring systems. Is the repair complete? | -- | -- | |
11 | Repair the open in the RED/BLU wire between the sunroof control module and the sunroof actuator. Refer to Wiring Repairs in wiring systems. Is the repair complete? | -- | -- | |
12 | Replace the sunroof switch assembly. Refer to Sunroof Switch Replacement in Power Sunroof. Is the repair complete? | -- | -- | |
13 | Replace the sunroof actuator assembly. Refer to Sunroof Actuator Replacement . Is the repair complete? | -- | -- |
