Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Power Sunroof System Check? | -- | Go to Step 2 | |
2 |
Does the wire have a short to ground? | -- | Go to Step 5 | Go to Step 3 |
3 | Test for continuity using a J 39200 between terminal 3 of the sunroof control module connector and ground while depressing the tilt switch to the Up position. Does continuity exist? | -- | Go to Step 4 | Go to Step 10 |
4 | Replace the sunroof control module. Is the repair complete? | -- | -- | |
5 |
Does the wire have a short to ground? | -- | Go to Step 8 | Go to Step 6 |
6 | Test for continuity using a J 39200 between terminal 9 of the control module connector and terminal 6 of the actuator connector. Does continuity exist? | -- | Go to Step 7 | Go to Step 9 |
7 | Replace the sunroof actuator. Refer to Sunroof Actuator Replacement . Is the repair complete? | -- | -- | |
8 | Repair the open in the RED/BLU wire between terminal 9 of the control module connector and terminal 6 of the sunroof actuator connector. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
9 | Repair the open in the RED/BLU wire between terminal 9 of the control module connector and terminal 6 of the sunroof actuator connector. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
10 |
Does continuity exist? | -- | Go to Step 11 | Go to Step 12 |
11 | Replace the sunroof switch assembly. Refer to Sunroof Switch Replacement . Is the repair complete? | -- | -- | |
12 | Repair the open in the RED/YEL wire between terminal 5 of the sunroof switch connector and terminal 3 of the sunroof control module connector. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- |
