Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the power sunroof system check? | -- | Go to Step 2 | |
2 |
Does the wire have a short to ground? | -- | Go to Step 6 | Go to Step 3 |
3 | Test for a short to ground using a J 39200 between terminal 9 of the sunroof control module and ground. Does the wire have a short to ground? | -- | Go to Step 7 | Go to Step 4 |
4 | Test for continuity using a J 39200 between terminal 7 and ground while depressing the tilt switch to the Down position. Does continuity exist? | -- | Go to Step 5 | Go to Step 11 |
5 | Replace the sunroof control module. Is the repair complete? | -- | -- | |
6 |
Does the wire have a short to ground? | -- | Go to Step 9 | Go to Step 8 |
7 |
Does continuity exist? | -- | Go to Step 10 | Go to Step 8 |
8 | Replace the sunroof actuator assembly. Refer to Sunroof Actuator Replacement . Is the repair complete? | -- | -- | |
9 | Repair the open in the GRN/WHT wire between the control module connector terminal 8 and terminal 5 of the sunroof actuator. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
10 | Repair the open in the RED/BLU wire between the control module connector terminal 9 and terminal 6 of the sunroof actuator. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
11 |
Does continuity exist? | -- | Go to Step 12 | Go to Step 13 |
12 | Replace the sunroof switch assembly. Refer to Sunroof Switch Replacement . Is the repair complete? | -- | -- | |
13 | Repair the open in the RED/WHT wire between terminal 2 of the sunroof switch assembly and terminal 7 of the sunroof control module. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- |
