For 1990-2009 cars only
Removal Procedure
- Remove the front seat back cushion cover and pad. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement .
- Remove the following components from inner seat adjuster (7):
- Remove the recliner handle (10) from the outer seat adjuster (7).
- Gently pry the outboard finish cover (9) from the outer seat adjuster (7).
- Remove the following components from the seat adjusters:
| • | The screw |
| • | The inboard finish cover (6) |
| • | The 2 bolts (3) which secure each side of the seat back (1) to the seat adjusters (2). |
| • | The seat back cushion frame |
Installation Procedure
- Install the seat back (1) cushion frame to the seat adjusters. Secure the frame with the 2 bolts (3) at each seat adjuster.
- Install the outboard finish cover (9) to the outer seat adjuster (7).
- Install the recliner handle (10) to the outer seat adjuster (7).
- Install the inboard finish cover (6) to the inner seat adjuster (7).
- Install the front seat back cushion cover and pad. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
