GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Prizm 🢒 Suspension 🢒 Front Suspension 🢒 Front Suspension Support Brace Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

    2. Object Number: 327880 Size: SH
  2. Remove the 2 nuts (4, 6) from the front suspension brace (5).
  3. Remove the front suspension brace.

Installation Procedure

    Object Number: 327880 Size: SH
  1. Install the brace (5) to the front suspension bracket studs (3, 7).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Secure the brace with the 2 nuts (4, 6).

    3. Tighten
    Tighten the 2 nuts to 69 N·m (51 lb ft).

  3. Lower the vehicle.