GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Prizm 🢒 Restraints 🢒 SIR 🢒 Rear Floor Console Replacement

Removal Procedure

    Object Number: 432110 Size: SH
  1. Remove the screw (3) from each side of the front floor rear console (2) which secures the rear console to the front floor front console (1).

    2. Object Number: 432109 Size: SH
  2. Remove the 2 bolts (1) from the rear compartment of the rear console (2).
  3. Raise the parking brake lever.

    4. Object Number: 245097 Size: SH
  4. Remove the front floor rear console (1) from the vehicle.

Installation Procedure

    Object Number: 245097 Size: SH
  1. Install the front floor rear console (1) to the vehicle.

    2. Object Number: 432109 Size: SH
  2. Lower the parking brake lever.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the 2 bolts (1) to the rear compartment of the rear console.

    4. Tighten
    Tighten the front floor rear console bolts to 15 N·m (11 lb in).


    Object Number: 432110 Size: SH
  4. Install the screw (3) to each side of the front floor rear console (2) which secures the rear console to the front floor front console (1).