GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Prizm 🢒 Restraints 🢒 SIR 🢒 Inflatable Restraint Front End Discriminating Sensor Replacement - Right Side

Removal Procedure

    Object Number: 241268 Size: SH
  1. Disable the SIR system. Refer to Disabling the SIR System .
  2. Remove the RH headlamp assembly. Refer to Headlamp Assembly or Headlamp Bulb Replacement in Lighting Systems.
  3. Remove the front end discriminating sensor - right electrical connector (1).
  4. Remove the front end discriminating sensor - right fasteners (2).
  5. Remove the front end discriminating sensor (3).

Installation Procedure

    Object Number: 241268 Size: SH
  1. Install the front end discriminating sensor (3).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the front end discriminating sensor - right fasteners (2).

    3. Tighten
    Tighten the fasteners to 20 N·m (14 lb ft).


    Object Number: 241212 Size: SH
  3. Install the front end discriminating sensor - right electrical connector (1).
  4. Install the RH headlamp assembly. Refer to Headlamp Assembly or Headlamp Bulb Replacement in Lighting Systems.
  5. Enable the SIR system. Refer to Enabling the SIR System .