For 1990-2009 cars only
Removal Procedure
- Using a taped flat bladed tool, gently pry and release the 3 clips around the hazard warning switch trim plate (1).
- Disconnect the hazard warning switch electrical connector (1).
- Depress the tab on each side of the hazard switch.
- Remove the switch from the hazard warning switch trim plate (2).
Installation Procedure
- Install the hazard warning switch to the hazard warning switch trim plate (2). Ensure that the retaining tabs are fully engaged.
- Connect the hazard warning switch electrical connector (1).
- Install the hazard warning switch trim plate (2) to the IP. Ensure that the retaining clips are fully engaged.
