Schematic Reference: Exterior Lights Schematics

Did you review the Lighting System Description and Operation and perform the necessary inspections?

Go to Step 2

Go to Symptoms - Lighting Systems

Verify that the headlamps are inoperative in low beams.

Does the system operate normally?

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

1. Remove the DIMMER relay.
2. Connect a fused jumper wire from cavity 1 to cavity 4 of the socket where the DIMMER relay came from.
3. Turn the light switch to the head position.

Do the low beams illuminate?

Go to Step 4

Go to Step 5

Replace the DIMMER relay.

Is the replacement complete?

Go to Step 6

--

Locate and repair the open in the BLK wires between the DIMMER relay and the fuses. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

Go to Step 6

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 3