GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 245138  Size: SH
  1. Remove the windshield wiper arms. Refer to Windshield Wiper Arm Replacement in Wipers/Washer System.
  2. Remove the following components from the vehicle:
  3. • The 5 screws
    • The 6 plastic retainers
    • The air inlet grille panel (1)
  4. Remove the rear hood seal from the air inlet grille panel, if necessary. Refer to Hood Rear Seal Replacement .

Installation Procedure


    Object Number: 245138  Size: SH
  1. Install the rear hood seal to the air inlet grille panel, if removed. Refer to Hood Rear Seal Replacement .
  2. Install the air inlet grille panel (1) to the vehicle. Secure the panel with the following fasteners:
  3. • The 5 screws
    • The 6 plastic retainers
  4. Install the windshield wiper arms. Refer to Windshield Wiper Arm Replacement in Wipers/Washer System.