GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Prizm 🢒 Body and Accessories 🢒 Doors 🢒 Rear Door Weatherstrip Replacement

Removal Procedure

    Object Number: 242352 Size: SH
  1. Open the door.
  2. Remove the bolt (3) that retains the rear door check link (2) to the door jamb.

    3. Object Number: 627022 Size: SH
  3. Remove the following components from the door (2):
    4. • The rear door weatherstrip (1)
    • The plastic retainers

Installation Procedure

    Object Number: 627022 Size: SH
  1. Install the rear door weatherstrip (1) to the door (2). Ensure that the plastic retainers are completely engaged.

    2. Object Number: 242352 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolt (3) that retains the rear door check link (2) to the door jamb.

    3. Tighten
    Tighten the bolt to 5.5 N·m (49 lb in).