Removal Procedure
- Open the front side door.
- Remove the 2 door to hinge bolts (3 or 5).
- Remove the 2 hinge to door jamb bolts (1 or 7).
- Remove the upper (3) or lower (6) hinge from the vehicle.
Important: Remove only one hinge at a time in order to keep the door properly aligned.
Installation Procedure
- Install the hinge (2 or 6) to the door jamb. Secure the hinge with 2 door jamb bolts (1,7). Do not fully tighten at this time.
- Install the 2 door to hinge bolts (3 or 5).
- Repeat the removal and installation steps for the opposite hinge, if necessary.
- Close the front side door.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten all hinge bolts to 34 N·m (25 lb ft).
