GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Prizm 🢒 Body and Accessories 🢒 Interior Trim 🢒 Headlining Trim Panel Replacement

Removal Procedure

    Object Number: 241430 Size: SH
  1. Remove the quarter upper trim panels (2), by disengaging the 6 plastic retainers (1).
  2. Remove the center pillar upper trim panel. Refer to Center Pillar Upper Trim Panel Replacement .

    3. Object Number: 432007 Size: SH
  3. Lower the door opening frame garnish moldings (1, 2) on the front and rear door pinch weld flanges.
  4. Remove the front assist handle. Refer to Assist Handle Replacement .
  5. Remove the rear assist handles. Refer to Assist Handle and Rear Coat Hook Replacement .

    6. Object Number: 241992 Size: SH
  6. Gently pry and remove the windshield side garnish moldings (1).
  7. Remove the sunshades and retainers. Refer to Sunshade Replacement .
  8. Remove the courtesy and reading lamp/sunroof switch assembly. Refer to Sunroof Switch Replacement in Roof.
  9. Remove the dome lamp. Refer to Dome Lamp Replacement in Lighting Systems.

    10. Object Number: 241847 Size: SH
  10. Lower the front seat back cushions in order to gain clearance to remove the headlining trim finish panel.
  11. Remove the 3 plastic retainers (5) which secure the rear of the headlining trim finish panel.
  12. Lower the headlining trim finish panel (1). Remove the headlining through a rear door.

Installation Procedure

    Object Number: 241847 Size: SH
  1. Install the headlining trim finish panel through a rear door.
  2. Install the headlining panel (1) to the roof panel. Secure the headlining panel with the rear 3 plastic retainers (5).

    3. Object Number: 241992 Size: SH
  3. Install the dome lamp. Refer to Dome Lamp Replacement in Lighting Systems.
  4. Install the courtesy and reading lamp/sunroof switch assembly. Refer to Sunroof Switch Replacement in Roof.
  5. Install the sunshades and retainers. Refer to Sunshade Replacement .
  6. Install the windshield side garnish moldings (1) to the vehicle. Ensure that the plastic retainers are fully engaged.

    7. Object Number: 432007 Size: SH
  7. Install the front assist handle. Refer to Assist Handle Replacement .
  8. Install the rear assist handles. Refer to Assist Handle and Rear Coat Hook Replacement .
  9. Install the center pillar upper trim panel. Refer to Center Pillar Upper Trim Panel Replacement .
  10. Reposition the door opening frame garnish moldings (1, 2) on all doors to the correct position on the pinch well flange.

    11. Object Number: 241430 Size: SH
  11. Install the quarter upper trim panels (2). Ensure that the plastic retainers are fully engaged.
  12. Position the front seat back cushions back to the upright position.