GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Prizm 🢒 Engine 🢒 Engine Mechanical - 1.8L 🢒 Intake Manifold Installation
  1. Install the following components to the cylinder head:
    2. • A new intake manifold gasket
    • The intake manifold

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Use the following components in order to secure the manifold:
    3. • Two nuts
    • Three bolts

    Tighten
    Tighten the intake manifold nuts and the bolts to 18 N·m (13 lb ft).


    Object Number: 234438 Size: SH
  3. Install the intake manifold support bracket. Secure the bracket using 2 bolts (7).

    4. Tighten
    Tighten the intake manifold support bracket bolts to 50 N·m (37 lb ft).