Parking Brake Front Cable Replacement for Chevrolet Prizm 2002

1. Remove the park brake lever (11). Refer to Park Brake Lever Assembly Replacement .
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
3. Remove the following components:

•	The intermediate pipe

•	The catalytic converter heat shields

4. Remove the front cable (3) from the equalizer (4).
5. Remove the front cable from the vehicle.

1. Install the front cable (3) to the equalizer (4).
2. Position the front cable end into the passenger compartment.
3. Install the following components:

•	The intermediate pipe

•	The catalytic converter heat shield

4. Lower the vehicle.
5. Install the park brake lever. Refer to Park Brake Lever Assembly Replacement .