- Take the following steps in order to set-up for the EEPROM Programming.
| • | The battery is charged. |
| • | The battery and cigarette lighter connection is secure. |
| • | The Data Link Connector (DLC). |
- Refer to up-to-date Techline terminal and equipment user's instructions.
- If the VCM fails to program, do the following functions:
| • | Check all the VCM connections. |
| • | Check the Techline terminal and equipment for the latest software
version. |
| • | Try again to program the VCM. If it fails again, replace the VCM. |
Notice: The ignition should always be OFF when installing or removing the VCM
connectors in order to prevent damage.
- Perform the IAC valve reset procedure with the scan tool. Use misc.
test.
- For a functional check perform one of the steps:
| • | Use the Techline terminal and equipment in order to perform the
On-Board Diagnostic (OBD) System Check |
| • | Refer to A Powertrain On Board Diagnostic (OBD) System Check
. |
