Vehicle Speed Sensor for Chevrolet S10 Pickup - 2WD 1996

1. Raise the vehicle and install suitable safety stands.



2. Remove the wiring harness connector.

Remove the vehicle speed sensor bolt.

3. Remove the vehicle speed sensor. Use a suitable container to catch the fluid.

Remove the O-ring seal.

1. Install a new O-ring seal.

•	Coat the seal with a thin film of transmission oil.

2. The vehicle speed sensor.

Tighten
Tighten the bolt to 22 N·m (16 lb ft).

3. Install the harness connector.
4. Check the transmission oil level. Add transmission oil if needed.
5. Lower the vehicle.