GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 S10 Pickup - 2WD 🢒 Steering 🢒 Power Steering System 🢒 Checking and Adding Power Steering Fluid
  1. Turn ON the engine.
  2. Operate the engine until the power steering fluid reaches normal operating temperature, about 80°C (170°F).
  3. Turn OFF the engine.
  4. Clean the area surrounding the reservoir cap.
  5. Remove the reservoir cap.
  6. Inspect the fluid level.

    7. If the fluid level is low, add power steering fluid to the proper level. Refer to Fluid Capacities and Recommended Fluids and Lubricants in Maintenance and Lubrication.

  7. Reinstall the reservoir cap.
  8. When you inspect the fluid level after you service the steering system, bleed the air from the system.

    9. Refer to Power Steering System Bleeding .