GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 S10 Pickup - 2WD 🢒 Body and Accessories 🢒 Bumpers 🢒 Rear Bumper Filler Panel Replacement

Removal Procedure
  1. Remove the license plate harness. Refer to Rear License Lamp Replacement in Lighting Systems.

    2. Object Number: 3825 Size: SH
  2. Remove the bolts to the bumper filler panel.
  3. Remove the bumper filler panel from the vehicle.

Installation Procedure

    Object Number: 3825 Size: SH
  1. Install the bumper filler panel to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolts to the bumper filler panel.

    3. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).

  3. Install the license plate lamp harness. Refer to Rear License Lamp Replacement in Lighting Systems.