For 1990-2009 cars only
Removal Procedure
- Remove the radiator grille. Refer to Grille Replacement in Exterior Trim.
- Remove the front bumper from the vehicle. Refer to Front Bumper Impact Bar Replacement .
- Remove the bolts that retain the front bumper end cap to the deflector.
- Remove the license plate bracket bolts, if equipped.
- Remove the license plate bracket, if equipped.
- Remove the deflector bolts.
- Remove the deflector from the vehicle.
- Remove the fog lamps from the deflector, if equipped. Refer to Grille Replacement in Exterior Trim.
Installation Procedure
- Install the fog lamps to the deflector, if equipped. Refer to Grille Replacement in Exterior Trim.
- Install the deflector to the vehicle.
- Install the license plate bracket, if equipped.
- Install the license plate bracket bolts, if equipped.
- Install the bolts that retain the deflector to the front bumper.
- Install the bolts that retain the front bumper end cap to the deflector.
- Install the front bumper to the vehicle. Refer to Front Bumper Impact Bar Replacement .
- Install the radiator grille. Refer to Grille Replacement in Exterior Trim.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the bolts to 7 N·m (62 lb in).
Tighten
Tighten the bolts to 7 N·m (62 lb in).
