GM Service Manual Online
For 1990-2009 cars only

Test Description

The number(s) below refer to the step number(s) on the diagnostic table.

  1. This step tests for a blower motor that does not operate regardless of the desired blower motor speed.

  2. This step tests for a blower motor that operates, yet does not accurately respond to the desired blower motor speed.

Step

Action

Yes

No

Schematic Reference: HVAC Schematics

DEFINITION: Air does not flow correctly from the air distribution outlets.

1

Did you review the HVAC operation and perform the necessary inspections?

Go to Step 2

Go to Diagnostic System Check - HVAC Systems - Manual

2

  1. Turn ON the ignition, with the engine OFF.
  2. Place the blower motor switch in the OFF position.

Is the blower motor OFF?

Go to Step 3

Go to Blower Motor Always On

3

Place the blower motor switch in each speed position.

Does the blower motor operate at all?

Go to Step 4

Go to Blower Motor Inoperative

4

Does the blower motor operate in each speed position?

Go to Step 5

Go to Blower Motor Malfunction

5

  1. Start the engine.
  2. Place the blower motor switch in the maximum speed position.
  3. Place the mode switch in each position.

Is the airflow sufficient from the correct outlets in each mode?

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Vacuum Diagnosis