For 1990-2009 cars only
- Remove the headlamp assembly as shown in "Two-Piece Composite Headlamp System" under Headlamps
- Locate the locking tabs on the assembly. Squeeze the tabs together and push that end of the assembly out while holding the tabs. The assembly will swing out.
- Unplug the electrical connector.
- Turn the harness bulb socket counterclockwise to remove it. Pull the bulb straight out to remove it from the socket.
- Push the new bulb into the socket until it snaps into place.
- Put the socket into the lamp assembly and turn it clockwise until it is tight.
- To reinstall the assembly, snap the outboard end of the lamp assembly back into the vehicle. Then swing the assembly in and snap it into place.
- Install the two retaining clips.
- Close the hood.
