Tools Required

1. Remove the differential assembly. Refer to Differential Replacement .



2. Remove the differential side bearings by doing the following:

2.1.	Install the differential assembly into a vise.

2.2.	Install the J 8107-2 (7.6 inch axle) or the J 8107-4 (8.6 inch axle) (1) J 22888-20A  (2) onto the differential case.

2.3.	Remove the differential side bearings using the J 22888-20A .

3. Remove the differential assembly from the vise.

1. Install the differential side bearings by doing the following:

1.1.	In order to protect the differential case, install the J 8107-2 or the J 8107-4 in the case on the side opposite the bearing installation.

1.2.	Install the J 25299 (7.6 inch axle) or theJ 21784 (8.6 inch axle) (2) and the J 8092  (1) onto the differential case bearing as shown.

1.3.	Drive the bearing onto the case using the J 25299 or the J 21784  (2) and the J 8092  (1).

2. Install the differential assembly. Refer to Differential Replacement .