GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2004 🢒 S10 Pickup - 2WD 🢒 General Information 🢒 General Information 🢒 Rear Axle Housing Cover and Gasket Replacement

Removal Procedure

    Object Number: 341650 Size: SH
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Drain the rear axle. Refer to Rear Axle Lubricant Replacement .
  3. Remove the rear axle housing cover bolts (1).
  4. Remove the rear axle housing cover (2) from the axle housing.
    5. 4.1. Catch the oil in a drain pan.
    4.2. Remove any gasket material from the rear axle housing and/or the rear axle housing cover.

Installation Procedure

    Object Number: 341650 Size: SH
  1. Install the rear axle housing cover (2) and a new gasket.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the rear axle housing cover bolts (1).

    3. Tighten
    Tighten the rear housing cover bolts in a crosswise pattern to 39 N·m (29 lb ft).

  3. Fill the rear axle. Use the proper fluid. Refer to Approximate Fluid Capacities and Fluid and Lubricant Recommendations in Maintenance and Lubrication.
  4. Lower the vehicle.