Was the Hydraulic Brake System Diagnostic Check performed?

--

Go to Step 2

Go to Hydraulic Brake Diagnostic System Check .

Inspect the disc brake pads and brake shoe linings for the following conditions:

Refer to Brake Pad Inspection in Disc Brakes or Brake Shoe Inspection in Drum Brakes.

Do any of the above conditions apply?

--

Go to Step 3

Go to Step 4

Replace the brake linings. Refer to the appropriate procedure:

Is the repair complete?

--

Go to Step 8

--

Inspect the brake rotors for the following conditions:

Refer to the following procedures:

Do any of the above conditions apply?

--

Go to Step 5

Go to Step 6

1. Refinish the brake rotor. Refer to Brake Rotor Refinishing in Disc Brakes.
2. Inspect the thickness of the brake rotor. Refer to Component Specifications in Disc Brakes.
3. If refinishing the brake rotor results in a thickness that is less than the thinnest (Refinishing) thickness, replace the rotor. Refer to Brake Rotor Replacement in Disc Brakes.

Is the repair complete?

--

Go to Step 8

--

Inspect brake assembly for loose, broken, or missing components. Refer to the following procedures:

Are there any loose, broken, or missing brake assembly components?

--

Go to Step 7

Go to Step 8

Tighten or replace the loose, broken or missing brake assembly components. Refer to the appropriate procedure:

Is the repair complete?

--

Go to Step 8

--

Verify proper brake system operation.

Does the brake system operate properly?

--

System OK

Go to Hydraulic Brake Diagnostic System Check .