GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 S10 Pickup - 4WD 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Console Shift Boot Replacement

Removal Procedure

    Object Number: 392696 Size: SH
  1. Remove the shift handle retaining clip at the front of the handle.
  2. Remove the shift handle from the shift lever.
  3. Remove the screws that retain the shift boot to the vehicle.

Installation Procedure

    Object Number: 392696 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the fasteners that retain the shift boot to the vehicle

    2. Tighten
    Tighten the screws that retain the shift boot to the vehicle 1.9 N·m (17 lb in).

  2. Install the shift handle to the shift lever.
  3. Install the shift handle retaining clip at the front of the handle.