Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the BCM System Check performed? | -- | Go to Step 2 | Go to Diagnostic System Check - Body Control System in Body Control System |
2 | Was the Audible Warnings System Check performed? | -- | Go to Step 3 | |
3 |
Does the KEY IN IGNITION test display NO? | -- | Go to Step 4 | Go to Step 8 |
4 |
Does the PARKLAMPS test display OFF? | -- | Go to Step 5 | Go to Step 9 |
5 | Inspect the connections at the BCM. Are the connections in need of repair? | -- | Go to Step 6 | Go to Step 7 |
6 | Repair the connections as necessary. Is the repair complete? | -- | -- | |
7 | Replace the BCM. Refer to Body Control Module Replacement in Body Control System. Is the repair complete? | -- | -- | |
8 | Locate and repair the short to ground in CKT 80 between the BCM connector C2 terminal B9 and the key in ignition alarm switch. Is the repair complete? | -- | -- | |
9 | Are the park lamps ON with the switch OFF? | -- | Go to Exterior Lights System Check in Lighting Systems | Go to Step 5 |
