GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 S10 Pickup - 4WD 🢒 Body and Accessories 🢒 Body Front End 🢒 Ambient Air Temperature Sensor Replacement

Removal Procedure

    Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

  1. Remove the negative battery cable.
  2. Raise the hood.

    3. Object Number: 441679 Size: SH
  3. Disconnect the wiring harness electrical connector from the outside air temperature sensor.
  4. Remove the outside air temperature sensor from the vehicle.

Installation Procedure

    Object Number: 441679 Size: SH
  1. Install the outside air temperature sensor to the vehicle.
  2. Connect the wiring harness electrical connector to the outside air temperature sensor.
  3. Install the negative battery cable.