Oil Level Indicator and Tube Removal J Car

1. Remove the oil level indicator.
2. Remove the oil fill tube nut.
3. Remove the oil fill tube.
4. Remove the oil fill tube seal from the engine block.

Oil Level Indicator and Tube Removal S/T Truck

1. Install the oil fill tube seal.
2. Install the oil fill tube.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the oil fill tube nut.

Tighten
Tighten the oil fill tube nut to 50 N·m (37 lb ft).

4. Install the oil level indicator.