Mass Airflow Sensor with Intake Air Temperature Sensor Replacement for Chevrolet SSR 2003

1. Open the hood.
2. Disconnect the electrical connection from mass air flow (MAF)/intake air temperature (IAT) sensor.
3. Remove air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
4. Loosen clamp (2) retaining MAF/IAT to upper air box.



5. Remove MAF/IAT (1) sensor from vehicle.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the MAF/IAT (1) sensor to upper air box.

Tighten
Tighten clamp (2) to 4 N·m (35 lb in).

2. Install the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
3. Connect the electrical connector to MAF/IAT sensor.
4. Close the hood.