GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 SSR 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Lever Replacement

Removal Procedure

    Object Number: 1270841 Size: SH
  1. Release the park brake if applied.
  2. Remove the center console. Refer to Console Replacement in Instrument Panel, Gages, and Console.
  3. Disable the park brake automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling .
  4. Remove the electrical connector for the park brake switch.

    5. Object Number: 1336383 Size: SH
  5. Remove the mounting nuts for the park brake handle.
  6. Remove the park brake handle assembly.

    7. Object Number: 1270843 Size: SH
  7. Remove the front park brake cable from the park brake handle.
  8. Remove the park brake handle from the vehicle.

Installation Procedure

    Object Number: 1270843 Size: SH
  1. Install the front park brake cable.
  2. Install the front park brake cable.

    3. Object Number: 1336383 Size: SH
  3. Position the park brake handle on the mounting studs.

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the mounting bolts.

    5. Tighten
    Tighten the mounting bolts to 25 N·m (18 lb ft).


    Object Number: 1270841 Size: SH
  5. Install the electrical connector for the park brake switch.
  6. Enable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling .
  7. Install the center console. Refer to Console Replacement in Instrument Panel, Gages, and Console.
  8. Check operation of the park brake handle.