Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Exterior Lights Schematics Connector End View Reference: Lighting Systems Connector End Views | |||
1 | Did you perform the Lighting Systems Diagnostic System Check? | Go to Step 2 | |
2 | Verify that the license lamps are inoperative. Do the license lamps operate normally? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Is the left tail lamp inoperative also? | Go to Step 5 | Go to Step 4 |
4 | Inspect the inoperative bulbs/sockets for open filaments or poor terminal contact. Does any lamp have an open filament or poor terminal contact? | Go to Step 7 | Go to Step 6 |
5 | Repair the short to ground in the license lamp supply voltage circuit or left tail lamp tail supply voltage circuit or . Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 8 | -- |
6 | Repair the open or high resistance in the license lamps supply voltage circuit or ground circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 8 | -- |
7 | Replace the inoperative bulb or repair/replace the socket. Refer to Wiring Repairs in Wiring Systems or License Lamp Bulb Replacement . Did you complete the repair? | Go to Step 8 | -- |
8 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
