GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 SSR 🢒 Body and Accessories 🢒 Instrument Panel, Gages, and Console 🢒 Front Floor Console Compartment Door Hinge Replacement

Removal Procedure
  1. Remove the rear upper garnish molding. Refer to Rear Upper Garnish Molding Replacement .
  2. Remove the console upper trim plate. Refer to Front Floor Upper Console Trim Plate Replacement .

    3. Object Number: 1204246 Size: SH
  3. Remove the 3 screws retaining the upper hinge to the console upper trim plate.
  4. Remove the hinge from the console upper trim plate.

Installation Procedure
  1. Position the hinge to the console upper trim plate.

    2. Object Number: 1204246 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the 3 screws retaining the upper hinge to the console upper trim plate.

    3. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).

  3. Install the console upper trim plate. Refer to Front Floor Upper Console Trim Plate Replacement .
  4. Install the rear upper garnish molding. Refer to Rear Upper Garnish Molding Replacement .