Diagnostic System Check - Body Rear End. Chevrolet SSR 2003

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2003 🢒 SSR 🢒 Body and Accessories 🢒 Body Rear End 🢒 Diagnostic System Check - Body Rear End

Test Description

The numbers below refer to the step numbers on the diagnostic table.

Lack of communication may be due to a partial malfunction of the class 2 serial data circuit or due to a total malfunction of the class 2 serial data circuit. The specified procedure will determine the particular condition.

The presence of DTCs which begin with U indicate some other module is not communicating. The specified procedure will compile all the available information before tests are performed.

Step	Action	Yes	No
1	Install a scan tool. Does the scan tool power up?	Go to Step 2	Go to Scan Tool Does Not Power Up in Data Link Communications
2	Turn ON the ignition, with the engine OFF. Attempt to establish communication with the roof and door module (RDM) and the instrument panel cluster (IPC). Does the scan tool communicate with the BCM and the IPC?	Go to Step 3	Go to Scan Tool Does Not Communicate with Class 2 Device in Data Link Communications
3	Select the RDM display DTCs function on the scan tool. Does the scan tool display any DTCs?	Go to Step 4	Go to Symptoms - Body Rear End
4	Does the scan tool display any DTCs which begin with a U?	Go to Scan Tool Does Not Communicate with Class 2 Device in Data Link Communications	Go to Diagnostic Trouble Code (DTC) List in Roof.