Your vehicle has a personalization feature that allows you to program certain features to a preferred setting for up to two drivers. The number of programmable features varies depending upon which model of the vehicle you purchased. Once the features are programmed, the saved settings are recalled by pressing the unlock button on the remote keyless entry transmitter, 1 or 2, or by pressing the appropriate memory button, 1 or 2, located on the outboard side of the driver's seat. See Memory Seat for more information.
The following is a list of available programmable options:
| • | AUTOMATIC LOCKING |
| • | AUTOMATIC UNLOCKING |
| • | REMOTE LOCK FEEDBACK |
| • | REMOTE UNLOCK FEEDBACK |
| • | HEADLAMPS ON AT EXIT |
| • | PERIMETER LIGHTING |
| • | SEAT POSITION RECALL (If equipped) |
| • | DISPLAY LANGUAGE |
| • | DISPLAY UNITS (U.S./MET) |
Automatic Locking
This feature allows you to choose how the vehicle's doors are locked. Press the personalization button until AUTOMATIC LOCKING appears in the display. To access the modes for AUTOMATIC LOCKING, press the select button. Once AUTOMATIC LOCKING is selected, press the select button to scroll through the following modes:
Mode 1: LOCK DOORS OUT OF PARKMode 2: LOCK DOORS WITH SPEED
If you choose Mode 1, the doors will lock when the vehicle is shifted out of PARK (P).
If you choose Mode 2, the doors will lock when the vehicle speed is above 8 mph (13 km/h) for three seconds.
Scroll through the list of modes. When the mode you want is displayed on the DIC, press personalization button to set your choice, return to the personalization menu, and advance to the next programmable feature.
For more information on automatic door locks see Programmable Automatic Door Locks .
Automatic Unlocking
This feature allows you to choose how the vehicle's doors are unlocked. Press the personalization button until AUTOMATIC UNLOCKING appears in the display. To access the modes for AUTOMATIC UNLOCKING, press the select button. Once AUTOMATIC UNLOCKING is selected, press the select button to scroll through the following modes:
Mode 1: UNLOCK ALL IN PARKMode 2: UNLOCK ALL AT KEY OUT
Mode 3: UNLOCK DRIVER IN PARK
Mode 4: UNLOCK DOORS MANUALLY
If you choose Mode 1, all of the doors will unlock when the vehicle is shifted into PARK (P).
If you choose Mode 2, all of the doors will unlock when the key is taken out of the ignition.
If you choose Mode 3, the driver's door will be unlocked when the vehicle is shifted into PARK (P).
If you choose Mode 4, the doors will not be unlocked automatically.
Scroll through the list of modes. When the mode you want is displayed on the DIC, press personalization button to set your choice, return to the personalization menu, and advance to the next programmable feature.
For more information on automatic door locks see Programmable Automatic Door Locks .
Remote Lock Feedback
This feature allows you to choose whether or not the horn honks and the parking lamps flash when you lock the vehicle with the remote keyless entry transmitter. Press the personalization button until REMOTE LOCK FEEDBACK appears in the display. To access the modes for REMOTE LOCK FEEDBACK, press the select button. Once REMOTE LOCK FEEDBACK is selected, press the select button to scroll through the following modes:
Mode 1: LOCK FEEDBACK: BOTHMode 2: LOCK FEEDBACK: OFF
Mode 3: LOCK FEEDBACK: HORN
Mode 4: LOCK FEEDBACK: LAMPS
If you choose Mode 1, the parking lamps will flash each time you press the lock button on the remote keyless entry transmitter and the horn will chirp the second time you press the lock button.
If you choose Mode 2, there will be no feedback when locking the vehicle.
If you choose Mode 3, the horn will chirp the second time you press the button with the lock symbol on the remote keyless entry transmitter.
If you choose Mode 4, the parking lamps will flash each time you press the button with the lock symbol on the remote keyless entry transmitter.
Scroll through the list of modes. When the mode you want is displayed on the DIC, press personalization button to set your choice, return to the personalization menu, and advance to the next programmable feature.
Remote Unlock Feedback
This feature allows you to choose whether or not the parking lamps flash and the horn honks when you unlock the vehicle with the remote keyless entry transmitter. Press the personalization button until REMOTE UNLOCK FEEDBACK appears in the display. To access the modes for REMOTE UNLOCK FEEDBACK, press the select button. Once REMOTE UNLOCK FEEDBACK is selected, press the select button to scroll through the following modes:
Mode 1: UNLOCK FEEDBACK: BOTHMode 2: UNLOCK FEEDBACK: OFF
Mode 3: UNLOCK FEEDBACK: HORN
Mode 4: UNLOCK FEEDBACK: LAMPS
If you choose Mode 1, the parking lamps will flash each time you press the button with the unlock symbol on the remote keyless entry transmitter. The horn will chirp the second time you press the unlock button.
If you choose Mode 2, there will be no feedback when unlocking the vehicle.
If you choose Mode 3, the horn will chirp the second time you press the button with the unlock symbol on the remote keyless entry transmitter.
If you choose Mode 4, the parking lamps will flash each time you press the button with the unlock symbol on the remote keyless entry transmitter.
Scroll through the list of modes. When the mode you want is displayed on the DIC, press personalization button to set your choice, return to the personalization menu, and advance to the next programmable feature.
Headlamps on at Exit
This feature allows you to set the amount of time you want the headlamps to remain on after you exit the vehicle. Press the personalization button until HEADLAMPS ON AT EXIT appears in the display. To access the modes for HEADLAMPS ON AT EXIT, press the select button. Once HEADLAMPS ON AT EXIT is selected, press the select button to scroll through the following modes:
Mode 1: HEADLAMP DELAY: 10 SECMode 2: HEADLAMP DELAY: 20 SEC
Mode 3: HEADLAMP DELAY: 40 SEC
Mode 4: HEADLAMP DELAY: 60 SEC
Mode 5: HEADLAMP DELAY: OFF
If you choose Mode 5, the headlamps will turn off as soon as you turn off the vehicle.
Scroll through the list of modes. When the mode you want is displayed on the DIC, press personalization button to set your choice, return to the personalization menu, and advance to the next programmable feature.
Perimeter Lighting
This feature allows you to choose whether or not certain exterior lamps turn on when the unlock button on the remote keyless entry transmitter is pressed. Press the personalization button until PERIMETER LIGHTING appears in the display. To access the modes for PERIMETER LIGHTING, press the select button. Once PERIMETER LIGHTING is selected, press the select button to scroll through the following modes:
Mode 1: PERIMETER LIGHTING ONMode 2: PERIMETER LIGHTING OFF
If you choose Mode 1, the headlamps and back-up lamps will come on for 40 seconds, if it is dark enough outside, when you unlock the vehicle with the remote keyless entry transmitter.
Scroll through the list of modes. When the mode you want is displayed on the DIC, press personalization button to set your choice, return to the personalization menu, and advance to the next programmable feature.
Seat Position Recall
This feature allows you to choose how any previously programmed seat position is recalled. Press the personalization button until SEAT POSITION RECALL appears in the display. To access the modes for SEAT POSITION RECALL, press the select button. Once SEAT POSITION RECALL is selected, press the select button to scroll through the following modes:
Mode 1: SEAT POSITION RECALL OFFMode 2: SEAT POSITION RECALL AT KEY IN
Mode 3: SEAT POSITION RECALL ON REMOTE
If you choose Mode 1, the memory seat position you saved will only be recalled when the memory button 1 or 2 is pressed.
If you choose Mode 2, the memory seat position you saved will be recalled when you put the key in the ignition.
If you choose Mode 3, the memory seat position you saved will be recalled when you unlock the vehicle with the remote keyless entry transmitter.
Scroll through the list of modes. When the mode you want is displayed on the DIC, press personalization button to set your choice, return to the personalization menu, and advance to the next programmable feature. See Memory Seat for more information.
Display Language
This feature allows you to choose the language in which the DIC information will be displayed. Press the select button until DISPLAY LANGUAGE appears on the DIC. Once DISPLAY LANGUAGE is selected, press the select button to scroll through the following modes:
Mode 1: ENGLISHMode 2: FRANCAIS (French)
Mode 3: ESPANOL (Spanish)
When the language you desire is displayed on the DIC, press personalization button to set your choice, return to the personalization menu, and advance to the next programmable feature.
If you accidentally choose a language that you don't want, press and hold the personalization button and the trip information button at the same time. The DIC will begin scrolling through the languages in their particular language. English will be in English, French will be in French and so on. When you see the language that you would like, release both buttons. The DIC will then display the information in the language you chose.
Display Units (U.S./MET)
The feature allows you to choose the measurement units. Press the personalization button until DISPLAY UNITS appears in the display. To access the modes for DISPLAY UNITS, press the select button. Once DISPLAY UNITS is selected, press the select button to scroll through the following modes:
Mode 1: UNITS: U.S. (ENGLISH)Mode 2: UNITS: METRIC (km/L)
Mode 3: UNITS: METRIC (L/100km)
If you choose Mode 1, all information will be displayed in English units.
If you choose Mode 2 or 3, all information will be displayed in metric units.
Scroll through the list of modes. When the mode you want is displayed on the DIC, press personalization button to set your choice, return to the personalization menu, and advance to the next programmable feature.
