Tools Required
J 38185 Hose Clamp Pliers
Removal Procedure
- Drain the cooling system. Refer to
Cooling System Draining and Filling
.
- Remove the air cleaner assembly. Refer to
Upper Intake Manifold Sight Shield Replacement
in
Engine Controls.
- Disengage tension on the radiator inlet hose clamp at the radiator using J 38185
.
- Disconnect the radiator inlet hose (1) from the radiator.
- Disengage tension on the radiator inlet hose clamp at the engine usingJ 38185
.
- Disconnect the radiator inlet hose (1)
from the engine.
- Remove the radiator inlet hose (1).
Installation Procedure
Notice: Make sure the reference marks on the hoses and the radiator are lined
up. A twist on the hose would place strain on the radiator fitting which could
cause the fitting to crack or break.
Important: Lubricate the inside diameters of the hose with clean coolant prior to installation.
- Install the radiator inlet hose (1).
- Connect the radiator inlet hose (1) to
the engine.
- Engage tension on the radiator inlet hose clamp at the engine using J 38185
.
- Connect the radiator inlet hose (1) to the radiator.
- Engage tension on the radiator inlet hose clamp at the radiator usingJ 38185
.
- Install the air cleaner assembly. Refer to
Upper Intake Manifold Sight Shield Replacement
in
Engine Controls.
- Fill the cooling system. Refer to
Cooling System Draining and Filling
.