Removal Procedure
- Remove the engine sight shield and mounting
bracket. Refer to
Upper Intake Manifold Sight Shield Replacement
in Engine Mechanical - 6.0L.
- Remove the electrical connector (1).
- Remove the retaining clip (2) for the manifold absolute pressure (MAP) (3)
sensor.
- Remove the MAP sensor (3) and seal (4) from the intake manifold (5).
Installation Procedure
- Install the MAP sensor (3) and the
seal (4) in the intake manifold (5).
- Install the retaining clip (2) for the MAP sensor (3).
- Install the electrical connector (1).
- Install the engine sight shield and the
mounting bracket. Refer to
Upper Intake Manifold Sight Shield Replacement
in Engine Mechanical - 6.0L.