Tools Required

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
3. Remove the steering knuckle with wheel hub and bearing attached. Refer to Steering Knuckle Replacement .



4. Remove the lower ball joint flange with a chisel.



5. Install J 9519-E and J 34874 to the lower ball joint.
6. Remove the lower ball joint from the lower control arm.

1. Install the lower ball joint to the lower control arm using J 9519-E , J 41435 , and J 45105-2 .
2. Remove J 9519-E , J 41435 , and J 45105-2 from the lower control arm.



3. Install the J 9519-E and the J 45105-1 to the lower ball joint.
4. Flare the lower ball joint flange.
5. Remove J 9519-E and J 45105-1 from the lower ball joint.
6. Install the steering knuckle with wheel hub and bearing attached. Refer to Steering Knuckle Replacement .
7. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
8. Lower the vehicle.
9. Check the front wheel alignment. Refer to Wheel Alignment Specifications in Wheel Alignment.