GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

  2. Object Number: 1277170  Size: SH
  3. Remove the stabilizer shaft link to lower control arm retaining nut.

  4. Object Number: 1277724  Size: SH
  5. Remove the stabilizer shaft link to stabilizer shaft retaining nut.
  6. Notice: Do not pry on the stabilizer shaft link. Use care when removing or installing the stabilizer shaft link in order to avoid tearing or puncturing the stabilizer shaft link boot. Damage to the stabilizer shaft link boot will lead to damage to the stabilizer shaft link.

  7. Remove the stabilizer shaft link.

Installation Procedure

  1. Install the stabilizer shaft link to the lower control arm.

  2. Object Number: 1277724  Size: SH
  3. Install the stabilizer shaft link to the stabilizer shaft.
  4. Install the stabilizer shaft link to lower control arm retaining nut.
  5. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1277170  Size: SH
  6. Install the stabilizer shaft link to stabilizer shaft retaining nut.
  7. Tighten
    Tighten the stabilizer shaft link retaining nuts to 100 N·m (74 lb ft).

  8. Lower the vehicle.