Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Remove the stabilizer shaft link retaining
nuts.
Notice: Do not pry on the stabilizer shaft link. Use care when removing or installing the stabilizer shaft link in order to avoid tearing or puncturing the stabilizer shaft link boot. Damage to the stabilizer shaft link boot will lead to damage to the stabilizer shaft link.
- Disconnect the stabilizer shaft link from the frame.
- Disconnect the stabilizer shaft link from the stabilizer shaft and remove
the stabilizer shaft link.
Installation Procedure
- Connect the stabilizer shaft link to the
stabilizer shaft and to the frame.
Notice: Refer to Fastener Notice in the Preface section.
- Install the stabilizer shaft link retaining nuts.
Tighten
Tighten the stabilizer shaft nuts to 100 N·m
(74 lb ft).
- Lower the vehicle.