GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the brake rotor. Refer to Front Brake Rotor Replacement in Disc Brakes.

  4. Object Number: 1277175  Size: SH
  5. Remove the antilock brake system (ABS) sensor mounting bolt from the wheel hub and bearing.
  6. Remove the ABS sensor from the wheel hub and bearing.

  7. Object Number: 750558  Size: SH
  8. Remove the wheel hub and bearing to the steering knuckle mounting bolts.

  9. Object Number: 750559  Size: SH
  10. Remove the wheel hub and bearing from the steering knuckle.
  11. Remove the splash shield from the steering knuckle.

Installation Procedure


    Object Number: 750559  Size: SH
  1. Install the splash shield to the steering knuckle. Align the splash shield to the steering knuckle threaded holes.
  2. Install the wheel hub and bearing to the steering knuckle. Align the threaded holes.
  3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 750558  Size: SH
  4. Install the wheel hub and bearing to the steering knuckle mounting bolts.
  5. Tighten
    Tighten the wheel hub and bearing mounting bolts to 105 N·m (77 lb ft).

  6. Install the ABS sensor to the wheel hub and bearing.

  7. Object Number: 1277175  Size: SH
  8. Install the ABS sensor mounting bolt to the wheel hub and bearing.
  9. Tighten
    Tighten the ABS sensor to the wheel hub and bearing mounting bolt to 18 N·m (13 lb ft).

  10. Install the brake rotor. Refer to Front Brake Rotor Replacement in Disc Brakes.
  11. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  12. Lower the Vehicle.