GM Service Manual Online
For 1990-2009 cars only

    Object Number: 317816  Size: SH

    Important: 

       • The hood hinges are bolted to the body and to the hood.
       • Make fore and aft adjustments by elongating the hood-side hinge holes.
       • Make vertical adjustment at the front by adjusting the hood bumpers up or down.

  1. Open the hood.
  2. Loosen the hinge to hood bolts.
  3. Adjust the hood to the fender position.
  4. Close the hood.
  5. Inspect the hood alignment.
  6. Open the hood.
  7. Adjust the hood as needed.
  8. Notice: Refer to Fastener Notice in the Preface section.

  9. Install the hinge to the hood bolts.
  10. Tighten
    Tighten the hood hinge bolts to 25 N·m (18 lb ft).

  11. Adjust the hood bumpers.
  12. Close the hood.