GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 SSR 🢒 Body 🢒 Body Front End 🢒 Front Fender Replacement

Removal Procedure

    Notice: When removing body panels, apply tape to corners of panel and adjacent surfaces to help prevent paint damage.

  1. Open the hood and support the hood using a temporary support.
  2. Apply protective tape to the front edge of the front door and the rear edge of the front bumper fascia.
  3. Remove the wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
  4. Remove the lower fender reinforcement fasteners. Refer to Front Fender Lower Reinforcement Replacement .
  5. Remove the rocker panel molding. Refer to Rocker Panel Front Molding Replacement .

    6. Object Number: 1251384 Size: SH
  6. Remove the front fascia. Refer to Front Bumper Fascia Replacement .

    7. Object Number: 1251391 Size: SH
  7. Remove the fasteners that retain the fender to the fender extension bracket (1).

    8. Object Number: 1361909 Size: SH
  8. Remove the fasteners from the rear fender bracket.
  9. Remove the upper fender fasteners (1).
  10. Remove the fender from the vehicle.

Installation Procedure

    Object Number: 1251391 Size: SH
  1. Position the fender to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1251384 Size: SH
  2. Install the upper fender fasteners (1). Hand tighten only.

    3. Tighten
    Tighten the bolts to 10 N·m (88 lb in).


    Object Number: 1361909 Size: SH
  3. Install the rear fender bracket fasteners. Hand tighten only.
  4. Install the fender extension bracket fasteners. Hand tighten only.
  5. Tighten all fasteners.

    6. Tighten
    Tighten all fasteners to 10 N·m (88 lb in).

  6. Install the front fascia. Refer to Front Bumper Fascia Replacement .
  7. Install the lower fender reinforcement fasteners. Refer to Front Fender Lower Reinforcement Replacement .
  8. Install the rocker panel molding. Refer to Rocker Panel Front Molding Replacement .
  9. Install the wheelhouse panel. Refer to Front Wheelhouse Liner Replacement .
  10. Remove protective tape on the front edge of the front door and the rear edge of the front bumper fascia.
  11. Remove the temporary hood support and close the hood.