GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 SSR 🢒 Body 🢒 Body Rear End 🢒 Endgate Lock Striker Replacement

Removal Procedure
  1. Open the rear compartment lid.
  2. Lower the endgate.
  3. Using a grease pencil or suitable marking device, mark the location of the endgate lock striker prior to removal for installation.

    4. Object Number: 1270483 Size: SH
  4. Remove the endgate lock striker fasteners.

    5. Object Number: 1270484 Size: SH
  5. Remove the endgate lock striker from the vehicle.

Installation Procedure

    Object Number: 1270484 Size: SH
  1. Install the endgate lock striker onto the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1270483 Size: SH
  2. Install the endgate lock striker fasteners. Align the lock striker to the marks made upon removal and tighten the fasteners.

    3. Tighten
    Tighten the lock striker fasteners to 10 N·m (88 lb in).

  3. Raise the endgate to inspect alignment.
  4. Close the endgate.
  5. Close the rear compartment lid.